Streamlined Plumbing Field Guide · how to

Water Heater: HVAC or Plumbing? Alabama Licenses the Trade, Not the Appliance

Both trades touch it and plenty of companies sell both, which is why the question keeps being asked. Alabama licenses the work, not the appliance — and the water side of any heater is plumbing.

By Brandon ByrdOwner · Licensed Master Plumber
November 18, 2026 · 8 min read
A domestic water heater tank and copper supply pipework in a utility room

Both trades touch it, which is why the question is a fair one. A water heater sits on the floor with either a flue or a set of electrical conductors running into it, which reads mechanical. It has the word heater in its name, which reads HVAC. It also has a cold supply in, a hot supply out, a shutoff, a relief valve, a discharge pipe and — in most installations that matter — a pan and a pan drain. All of that is plumbing. And plenty of companies sell both trades under one roof, so the answer a homeowner gets often depends on which department happened to be free.

Alabama's answer is narrower and considerably more useful: the state licenses the work, not the appliance. The water side of a water heater — any heater, tank or tankless, gas or electric — is plumbing work.

Why the confusion is real rather than lazy

Three things feed it, and none of them are silly.

The first is the word. English files anything that makes something warm under heating, and HVAC is literally heating, ventilation and air conditioning. A device whose entire job is heating sounds like it belongs there.

The second is the combustion hardware. A gas storage heater has a burner, a flue and a draft hood, and those look exactly like the parts on a gas furnace standing three feet away in the same closet. Same fuel, same venting logic, similar-looking sheet metal. The visual argument for "that's the HVAC guy's" is strong.

The third is commercial. A company that sells heating, cooling and plumbing has every reason to be relaxed about which of its trucks arrives, and the marketing does not draw the line because the marketing does not have to. The licence does.

What does Alabama actually license?

This is written down in two separate places, by two separate boards, and reading both settles it.

The Alabama Plumbers and Gas Fitters Examining Board certifies plumbers by activity. Its own definitions describe a journeyman plumber as a person who "engages in or works at the actual installation, repair, or replacement of plumbing systems," and a master plumber as a person or legal entity doing the same. The certification attaches to the work, not to a list of approved appliances.

The Alabama Board of Heating, Air Conditioning and Refrigeration Contractors runs on a parallel definition of its own. Its administrative rule defines a certified contractor as, in the rule's words, "any individual or any regularly employed person for any partnership or corporation who for hire is engaged in the installation or service and repair of heating, air conditioning or refrigeration systems." Water heaters are not mentioned anywhere in that definitions rule. Neither is potable water. The rule reaches natural-gas heating, air conditioning and refrigeration appliances — and, notably, not the piping running to those appliances.

So the two scopes do not actually overlap on a water heater. One board describes plumbing systems; the other describes heating, air conditioning and refrigeration systems and stops at the appliance rather than the pipe.

One water heater, several trades. Which parts belong to whom in Alabama.
The partThe tradeOurs?
Cold supply, hot outlet, shutoff, flex connectorsPlumbingYes
T&P relief valve and its discharge pipePlumbingYes
Expansion tank, drain pan, pan drain linePlumbingYes
The tank or tankless unit itself, set and connected to waterPlumbingYes
Gas line, gas shutoff, connector, sediment trapGas fitting — separate Alabama certificateNo
Flue and combustion venting on a gas unitHandled with the gas workNo
Electrical circuit, breaker, disconnectElectricalNo
Furnace or air handler sharing the closetHVACNo

The part we say out loud

Here is the honest version, and it is the reason this article exists.

Gas fitting in Alabama is its own certification. The same board issues it — journeyman gas fitter and master gas fitter sit alongside journeyman plumber and master plumber on the board's own licence-type list, as separate certificates with separate examinations. Holding one does not grant the other. We hold the plumbing certification and we do not hold the gas fitting certification.

What follows from that is specific rather than vague. On an electric water heater, the whole appliance and everything watery attached to it is ours. On a gas water heater, the water side is equally ours — the supply lines, the shutoff, the relief valve, the expansion tank, the pan and the drain — and the gas connection is a licensed gas fitter's work. That is not a technicality we discovered halfway through a job. It is a thing worth saying on the phone before anybody drives anywhere.

Tankless does not merge the trades

If anything it sharpens them.

An electric tankless unit is plumbing on the water side and electrical on the supply side, and the electrical side is the one that decides whether the project is feasible at all — these units draw enough that the panel, not the pipework, is usually the constraint. A gas tankless unit is plumbing on the water side, gas fitting on the gas side, and it carries combustion venting requirements of its own on top.

The maintenance picture splits the same way. Descaling and flushing a tankless heat exchanger is water-side work, and on this coast it is not optional — tankless maintenance in coastal Baldwin County covers why the interval here is shorter than the brochure suggests. Tankless water heaters as a service line, for us, means the water side of them.

What to say when you call somebody

Four pieces of information turn a guess into a scope, and all four are on or near the unit.

Electric or gas. Look for either a flue pipe leaving the top and a gas line entering the bottom, or an armoured electrical cable and no flue at all. This one determines which trades are involved before anything else is discussed.

Tank or tankless. A cylinder, or a wall-mounted box roughly the size of a briefcase.

What it is doing. No hot water at all is a different diagnosis from lukewarm water, and both are different from a water heater that is leaking. A leak from the tank body and a drip from the relief valve are also two separate problems that happen to make the same puddle.

How old it is. The serial number on the rating plate carries the manufacture date, and how long water heaters last in Baldwin County walks through reading it. Age is what decides whether the sensible conversation is repair or replacement, and the water heater replacement cost guide sets out what actually moves that number.

If the answer turns out to be replacement, the water-side work is water heater repair and replacement and it is ours. If water is already on the floor and spreading, that is emergency plumbing and the first move is the shutoff, not the phone. And if the tank is dry but there is water appearing somewhere else in the house, that is leak search and repair rather than water heater work at all.

The short version

A water heater is a plumbing appliance that happens to make heat. In Alabama the licence follows the trade, and the trade is determined by the work in front of you rather than by the object it is attached to. Water side, plumbing. Gas side, gas fitting — a separate certificate, and one we tell people plainly we do not hold. Electrical side, electrician.

Across Daphne, Fairhope, Spanish Fort and out to Foley, that division is the same at every address. What changes is which of those pieces your particular problem is sitting in — and that is a two-minute conversation, not a service call.

(251) 423-7654, any hour. Brandon Byrd, Alabama Master Plumber MP-4462.


Sources. Alabama certification types, definitions of journeyman and master plumber and gas fitter, the homeowner exemption, and the requirement that "Any Person or Entity who contracts, engages in, offers to engage in, or conveys the impression that he or she is certified in plumbing" be certified: Alabama Plumbers and Gas Fitters Examining Board, "How Do I Become Licensed?" and "Frequently Asked Questions" (pgfb.alabama.gov). Licence types and the active / lapsed / inactive status filter: the board's Individual Lookup search (alpgfb.igovsolution.net/online/Lookups/Individual.aspx). Definition of a certified heating, air conditioning and refrigeration contractor, and the absence of any reference to water heaters or potable water: Ala. Admin. Code r. 440-X-1-.01, Definitions, as published by the Legal Information Institute (law.cornell.edu). All retrieved 2026-08-04.

ShareXFacebook

Questions. Answered.

  • Is a water heater HVAC or plumbing?
    In Alabama the question is answered by what the work is, not by what the appliance is called. The water side of a water heater — the cold supply, the hot outlet, the shutoff, the relief valve and its discharge, the expansion tank, the pan and the pan drain — is plumbing, and the state's plumbing certification covers the installation, repair and replacement of plumbing systems. The heating and air conditioning board's own rule describes certified contractors as working on heating, air conditioning and refrigeration systems and does not mention water heaters at all.
  • Do you work on gas water heaters?
    We work on the water side of one. Gas fitting is a separate Alabama certification with its own exam and its own certificate, issued by the same board that issues the plumbing certificate but not included in it, and we do not hold it. So on a gas unit the supply lines, the shutoff, the relief valve, the expansion tank, the pan and the drain are ours, and the gas connection is a licensed gas fitter's work. We would rather tell you that on the phone than discover it in your garage.
  • Who installs an electric water heater in Alabama?
    A licensed plumber handles the water side and the unit itself; the electrical circuit feeding it is an electrician's work if it is being added or altered. On a straight like-for-like replacement into an existing, correctly sized circuit, that is a plumbing job start to finish. Where an electric heater is being installed for the first time, or moved, or upsized to a larger element load, the circuit needs its own trade and its own permit.
  • Does a tankless unit change the answer?
    No, it splits the same way. An electric tankless unit is plumbing on the water side and electrical on the supply side, and the electrical demand is genuinely large enough that the circuit question comes first. A gas tankless unit is plumbing on the water side, gas fitting on the gas side, and it also has combustion venting, which is its own set of requirements. Tankless does not merge the trades; it just makes the split more consequential.
  • How do I check that whoever turns up is actually licensed?
    The Alabama Plumbers and Gas Fitters Examining Board publishes a public search of individual and business certifications. You can look somebody up by license number, by name, or by county, and the search lets you filter by license status — active, lapsed or inactive. That status field is the part worth reading. A number on a truck proves that a number exists; the board's record is what tells you the certification behind it is current.
Related resources

Keep going.

Pages on the site that connect to this article — the plumbing work it covers, the towns it applies to, and the natural next step if you're ready to get someone out.

Free tools that pair with this guide

  • Plumbing Symptom Checker

    Pick what the house is doing and get the likely cause, how urgent it is, and the check you can make yourself. Free, no email.

  • Water Heater Sizing Tool

    First-hour rating, the tankless GPM target for Gulf Coast groundwater, and a straight tank-vs-tankless comparison.

Get help

Need a Service Call?

Reading the article and recognizing the problem? Skip ahead — call us.

Call nowSchedule service